PSS Hose Barb Plug - PYI Inc.

Description Documents Description This is a plug for the PSS Shaft Seal hose barb. If your boat will not exceed 10 knots under power then the PSS Shaft Seal does not require positive water feed. The PSS Shaft Seal can simply be "vented" or you can use this plug in place of the hose barb that's inserted into the carbon stator. "Burping" The PSS Shaft Seal You will also be required to "burp" the PSS Shaft Seal whenever there is air trapped inside. Simply pull back on the carbon stator, separating it from the stainless steel rotor. This will cause a quick mist of water to spray out. Important If your boat will exceed 10 knots under power then it is required that a positive water supply be plumbed to the PSS Shaft Seal for the purpose of lubricating and cooling

The PSS Shaft Seal is the number one selling marine mechanical seal worldwide! Order your complete PSS Shaft Seal for 100mm to 110mm shafts here!

PSS Shaft Seal - For 100mm to 165mm Shafts

PSS installation instructions (low res).pdf - PYI Inc.

Hose Barb .50 x .375 FPT PP - Cleaning Systems, Inc.

PYI Inc. PSS Type C Shaft Seal

PYI Inc. PSS Shaft Seal

PSS T-Kit - PYI Inc.

PYI Inc. PSS PRO Shaft Seal

PYI Inc Fisheries Supply

PSS Maintenance Kits - For 3/4 to 2-3/4 Shafts - PYI Inc.

Mist-A-Pipe, Dual Nozzle Two Stage – ProMeth

PSS installation instructions (low res).pdf - PYI Inc.