7/8 Male Flare Union SAE 45 Degree Fitting, Brass - SAE J512 – All
Midland Industries 10112 flare fitting is a brass 7/8 45 degree SAE flare union fitting. Used heavily in the automotive and heavy duty commercial vehicle industry. 7/8 Male Flare Union Specs: Hex - 1.25" Length - 2.72" Type - SAE Flare Union Angle - 45 Degrees Thread Size - 7/8”-14 Tube Outer Diameter - 5/8" SAE J512 B
Midland Industries 10112 flare fitting is a brass 7/8 45 degree SAE flare union fitting. Used heavily in the automotive and heavy duty commercial vehicle industry.
7/8 Male Flare Union Specs:
Hex - 1.25
Length - 2.72
Type - SAE Flare Union
Angle - 45 Degrees
Thread Size - 7/8”-14
Tube Outer Diameter - 5/8
SAE J512
Benefits:
Durable
Chemically resistant
Broad range of operating temperatures
SAE 45 degree flare vs SAE 37 degree flare JIC:
45 Degree and 37 degree fittings SAE fittings do share the same thread form. i.e. 7/8-14. But are not compatible in terms of fitment, unless your fitting is a 45/37 which is specifically designed to seat either 45 or 37 degrees.
7/8 Male Flare Union Cross References:
AMC 04042-14 7/8 SAE Flare
Parker 42F-14 7/8 SAE Flare
MAF 42-14 7/8 SAE Flare
Champion Brass U2-14 7/8 SAE Flare
Tip: if you don't have a gauge to identify a fittings angle. Fold a sticky note or piece of paper from one corner to the opposite corner, now you have a 45 degree gauge. Stand your fitting on end. if the paper is flush on both the fitting and the surface its sitting on, then your fitting is 45 degrees.
Brass SAE 45 Flare Fittings, & 37 Flare
90994 Male 45° Flare Cap 1/2 in.
Brass Tube Fittings and C37700 Brass Compression Fittings manufacturer
Festo Mounting Kit, SMBR Series, For Use With SMAT Series, 44% OFF
Parker Flare Fittings,Brass,1-7/8 46F-10-12
1/2 Male Sae 45 Flare to 1/2 Npt Male Run Tee Union Fitting Natural Gas Propane
45-degree elbow for connecting two tubes at an angle Flared tube connection on one end and male NPT connection on the other Brass for corrosion
Brass Flared Tube Fitting 45 Degree Forged Elbow SAE 45 Degree Flare 5/8 SAE Male x 1/2 NPT Male Pipe Thread Various Sizes 2pcs (5/8X1/2)
Festo Mounting Kit, SMBR Series, For Use With SMAT Series, 44% OFF
2) Flare Thread 7/16 5/8 3/8 1/2 3/4 UNF Male SAE 45 Degree Brass End Plug
Brass SAE 45 Degree Flare Fitting Seal Plug Assortment Kits,1/4 5/16 3/8 1/2 5/8 Tube OD(5pcs) : Industrial & Scientific
Parker Cap, 45 deg., Brass, Tube, 1/2 In., PK10 640F-8