1.25-12 Jam Nut - Right Hand Thread

1-1/4-12 Grade 5 Yellow Zinc Hex Jam Nut Jam Nut Wrench Size: 1-7/8" Recommended Torque Spec = 723 ft/lbs. Compliance: 3TG: Does not contain 3TG Diameter: 1-1/4" Diameter-Thread Size: 1-1/4"-12 Finish: Yellow Zinc Grade: 5 Material: Steel REACH: Y Specification: ASTM J995 System of Measurement: Imperial (Inch) Thickness: 0.719" Thread: Fine Thread Size: 12 Type: Jam Nut Wrench Size: 1-7/8" Product Weight: 0.361 lbs. Notes: Jam Nuts are often used to lock or "jam" something in place without clamping against another object; Jam Nuts are typically low profile compared to a standard nut. SAE J995 Grade 5 product marking. ANSI B1.1 UNC and UNF Class 2B thread dimensions. Yellow Zinc offers a modest amount of corrosion resistance, slightly higher than that of clear zinc. Recommended Torque Spec = 723 ft/lbs.

These 1.25-12 left hand bungs are welded into tubing to create suspension and setting links. 1 and 1.25 bungs are for use on tubing with a 1.5 ID.

Trail Gear Weld in Threaded Tube Adapter Bung 1.25-12 Left Hand Thread

FORGED ROD END, 1.25-12, 1.750 Width

Jeep Wrangler Long Front Lower Control Arms 2007-2018, JK

Threaded Tube Inserts 1.25 - 12 1.5 ID Pair - 1 Left and 1 Right

5) M12-1.25 Metric FINE Thread Hex Jam Thin Nuts Half Thick 12mm M12x1.25 Nut

Threaded studs / full thread / right-hand thread / right-hand thread from MISUMI

Hex Nuts & Jam Nuts - Haydon BoltsHaydon Bolts

1 1/4 x 1 LH Rod End Kit w/Tube Insert (1.5 ID), Jam Nut & High Misalignment Spacers (3/4)

4pcs M10 x 1.25 mm Pitch Stainless Steel Left Hand Thread Hex Nut Metric Thread: : Industrial & Scientific

Hex Nuts — Fastener Line

Yarış Stili Chromoly 1.25-12 tpi Boru Adaptörü RH TA-276-1, Ballistic Fabrication USA

Jam Nuts Carr Lane

Jeep Short Front Lower Control Arms 2018+, JL/JT

Jeep Wrangler Long Front Lower Control Arms 2007-2018, JK